Stp Configuration - Delta DVS-328 series User Manual

D V S M a n a g e d I n d u s t r i a l R a c k Mo u n t E t h e r n e t S wi t c h U s e r Ma n u a l

3.3.1.1 STP Configuration

Global Settings Description
Spanning Tree Admin Mode
Specify the admin mode of STP on the switch:
 Disable: STP is disabled. The settings do not take effect after you have applied
them, but you still can configure STP.
 Enable: STP is enabled. The settings take effect after you have applied them.
Force Protocol Version
Specify the version of the STP protocol:
 STP: Spanning Tree Protocol.
 RSTP: Rapid Spanning Tree Protocol.
 MSTP: Multiple Spanning Tree Protocol.
Configuration Name
Enter the STP identifier for the switch. You can configure alphanumeric characters
and special characters, and the maximum length is 32.
Configuration Revision Level
Enter an identifier that specifies the current configuration. The number must be in the
range of 0 to 65535.
Forward BPDU while STP Disabled
Specify whether spanning tree bridge protocol data units (BPDUs) are forwarded:
 Disable: When STP is disabled, Spanning tree BPDUs are not forwarded.
 Enable: When STP is disabled, Spanning tree BPDUs are forwarded.
Configuration Digest Key
This field displays a calculated value from the MSTP configuration. The switches are
qualified by the key and the function in the same region.
Configuration Format Selector
This field displays the configuration identifier format selector that is used.
3 - 4 4
Description Factory default
Enable
MSTP
MAC address of
the switch
0
Disable
Fixed
0