Syslog; Show Logs; Logs Configuration - Delta DVS-328 series User Manual

3.12.7 SYSLOG

The SYSLOG function allows you to monitor the switch. When faults, errors, configuration changes or specified
events happen, this function can generate messages, store the messages locally or forward the messages to
one syslog server or more syslog servers. You can choose the severity level to filter the message according to
your requirement.

3.12.7.1 Show Logs

The numbers of messages which can be shown on this page depend on the setting of the severity on the Logs
Configuration page. The logs are cleared after the switch is rebooted. To save the logs after the switch is
rebooted, you have to send them to a syslog server or use the email function.
The log message format is described below:
<134>1970-01-01 03:26:33 DVS-108W02-2SFP MSR configuration changed
Log message component
<134>
1970-01-01 03:26:33
DVS-108W02-2SFP
MSR
configuration changed

3.12.7.2 Logs Configuration

You can enable, disable and configure other system log settings on this page.
Description
The number contained in the angle brackets represents the message
priority, which is derived from the following values:
Priority = facility value + severity level.
In the example, the facility value is local0 (128). The severity value is
notification (5). For more information about the severity of a log
message, please see Logs Configuration.
The message was generated on 1970-01-01 00:02:50
The device name
The module that generated the message
The major description of the message: The configuration has been
changed.
C h a p t e r 3 F e a t u r e d F u n c t i o n s
3 - 11 3