Radius Server Config - Delta DVS-328 series User Manual

Dvs managed industrial rack mount ethernet switch
Table of Contents

Advertisement

User Management
User Name
Enter a user name. It supports up to 20 users, and a user name consists of up to 20
characters and is case sensitive. Only alphanumeric characters, dashes (-) and
underscores (_) are accepted.
Edit Password
Select Enabled, and then edit the password.
Password
Enter a password. Passwords are 1–20 alphanumeric characters in length and are
case sensitive. The password is displayed as eight asterisks (*).
Confirm Password
Enter the same password that you entered in the Password field.

3.11.2.2 RADIUS Server Config

RADIUS (Remote Authentication Dial In User Service) is a networking protocol that provides the centralized
Authentication, Authorization, and Accounting (AAA) management for computers to connect and use a network
service. The system implements the RADIUS client and provides the authentication functionality. RADIUS uses
UDP port 1812 by default.
RADIUS Server Configuration
Server ID
The identifier of the server
Address Type
Specify a type of address for the RADIUS server:
 IPv4: The RADIUS server has an IPv4 address.
 DNS: The RADIUS server has a DNS host name.
Server Address
Enter the IP address or the DNS host name of the RADIUS server. (It depends on
whether the Address Type field is IPv4 or DNS.)
Shared secret
Enter the shared secret (only characters and numbers) that is used to authenticate
and encrypt communications between the switch and the RADIUS server. This secret
needs to match the one on the RADIUS server.
Response Time (secs)
Enter the response time in seconds. This is the maximum period that the switch waits
for a response from the RADIUS server before retransmitting the authentication
request. Enter a period in the range of 1 to 120 seconds.
Retry Count
Enter the maximum number of times an authentication request is retransmitted. Enter
a number in the range of 1 to 254.
Port
Enter the UDP port number of the RADIUS server that is used for the authentication.
Description
Description
C h a p t e r 3 F e a t u r e d F u n c t i o n s
Factory default
None
None
None
None
Factory default
None
None
None
None
10
1812
3
3 - 9 7

Advertisement

Table of Contents
loading

Table of Contents