Binding Table; Security Settings; Security; Port Security - Delta DVS-328 series User Manual

D V S M a n a g e d I n d u s t r i a l R a c k Mo u n t E t h e r n e t S wi t c h U s e r Ma n u a l

3.10.2 Binding Table

The MAC binding information is displayed on this page.
MAC Binding Table
Setting
Interface
Direction
ACL Type
ACL ID
Seq No

3.11 Security Settings

The Delta DVS series switch provides many ways to verify the packets, authenticate users or block the attack
traffic. You can choose and configure these security settings according to your network environment.
IMPORTANT:
Make sure that you save the configuration in the Save Configuration
page after you have applied the configuration changes. (Save
ConfigSave Configuration) If you do not save the configuration,
then the configuration will be cleared after the switch is rebooted.

3.11.1 Security

This group allows you to configure a MAC address, an IP address or the Port authentication to reach the
security purpose.

3.11.1.1 Port Security

The port security lets you lock the interface. If the port security of the interface is enabled, then it can only
forward the traffic from the MAC addresses that you specified.
The Port Security feature allows you to stop the MAC address learning for a specific port. After you stop the
MAC learning (enable Port Security), only the source MAC address of the packet listed in the Static MAC
address table with the binding port can access the switch through the port, and other packets will be discarded.
3 - 8 8
The interface to which the MAC ACL is bound
The packet filtering direction for the MAC ACL. The only valid direction is
Inbound, which means the MAC ACL rules are applied to traffic entering the
interface.
The type of ACL to which the interface is bound. This is a fixed field that always
shows MAC ACL.
The name of the ACL to which the interface is bound
The sequence number that signifies the order of the ACL to which the interface is
bound.
Description