D X - 3 0 0 1 H 9 - V I n d u s t r i a l 3 G / W A N V P N R o u t e r U s e r M a n u a l
2.1
Web-based GUI Configuration
The DX-3001 Industrial Ethernet Cloud Router provides a friendly Web Browser Configuration for users to set up and
operate more intruitivly.
2.1.1
System Connection
2_
First, connect the PC used for configuration with Ethernet interface of the router directly or through the switch/hub.
2.1.2
Default IP Address/Account/Password
The default IP address of router is 192.168.1.1. The initial account and password is admin/admin
2.1.3
Local Network Setups
After the connection of the local computer and the router is done, you will need to set the network configruration for your
computer.
Obtain an IP address automatically by using the router as a DHCP server.
1.
Open Network Connections by clicking the Start button
2.
Under Network and Sharing Center, click View network connections.
3.
Right-click the connection that you want to change, and then click Properties.
an administrator password or confirmation, type the password or provide confirmation.
4.
Click the Networking tab. Under This connection uses the following items, click either Internet Protocol
Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6), and then click Properties.
5.
automatically using DHCP.
2 - 2
Click Obtain DNS server address automatically and then click OK to get a DNS server address
, and then clicking Control Panel.
If you're prompted for