Port Mirroring; Multiple Port Mirroring - Delta DVS-328 series User Manual

LLDP-MED Interface Configuration
Interface
This field displays the interface number or the port channel number.
Med Status
Specify the MED status:
 Enabled: MED is enabled for the interface.
 Disabled: MED is disabled for the interface.
Notification Status
Specify the notification status:
 Enabled: MED notifications are sent for the interface.
 Disabled: MED notifications are not sent for the interface.
MED Capabilities
Specify the MED TLVs which are transmitted:
 none: No MED TLVs are transmitted.
 network-policy: The network policy information is transmitted.
 capabilities: The capabilities information is transmitted.
 both: Both the network policy information and the capabilities information are
transmitted.

3.13.2 Port Mirroring

Port Mirror is used for monitoring the network traffic of the source port by the analyzer.

3.13.2.1 Multiple Port Mirroring

The Delta switch can select multiple interfaces as source ports and one interface as a destination or monitor
port. The monitor port can monitor the source ports' incoming and outgoing packets. Port Mirroring supports the
mirroring of the packets passing in, out the source port, or both at the same time. It supports N to 1 and up to 8
monitored ports per system. Ingress-mirrored packets are sent as unmodified packets (as the packets came in
on the ingress port). Egress-mirrored packets are sent as modified packets with a VLAN tag. If the packet is not
tagged, the packet will be tagged with tag 1. If the packet is tagged, the packet will not be modified. It does not
support the use of the LAG port as a monitored port or a mirror port.
Description
C h a p t e r 3 F e a t u r e d F u n c t i o n s
Factory default
interface number
Disabled
Disabled
None
3 - 1 2 7