Login Authentication; Login User Sessions - Delta DVS-328 series User Manual

D V S M a n a g e d I n d u s t r i a l R a c k Mo u n t E t h e r n e t S wi t c h U s e r Ma n u a l
TACACS+ AS Configuration
Active Server Address Type
Specify a type of address for the TACACS+ AS.
 IPv4: The TACACS+ AS server has an IPv4 address.
 DNS: The TACACS+ AS server has a DNS host name.
Active Server Address
Depending on the selection from the Active Server Address Type drop-down list, enter
the IP address or the DNS host name of the TACACS+ AS. The IP address or the
DNS host name needs to be already listed in the TACACS+ Server Configuration
table.
Retransmit
The number of times the switch searches for the AS in the TACACS+ Server
Configuration table if the switch can not establish a connection with the AS at the first
attempt. Enter a number in the range of 1 to 100.

3.11.2.6 Login Authentication

The Delta switch provides three authentication methods: Local, RADIUS, and TACACS+. If there is no RADIUS
or TACACS+ server in your network environment, you can use the local authentication method for the login
authentication.
Login Authentication
Login Authentication Mode
Specify the login authentication method:
 Local: A locally stored user ID and a password are used for the authentication. This
is the default setting. You need to set up a user account on the Local User
Management page.
 RADIUS: The user ID and the password are authenticated through a RADIUS
server.
 TACACS+: The user ID and the password are authenticated through a TACACS+
server.

3.11.2.7 Login User Sessions

The login user session is displayed on this page. The Delta switch supports up to 20 users, including the default
user admin.
3 - 1 0 0
Description
Description
Factory default
None
None
2
Factory default
Local