Port Settings - Delta DVS-328 series User Manual

3.1.3 Port Settings

You can configure the basic port settings and LAG settings of the Delta switch in the Port Settings group.

3.1.3.1 Port Settings

You can configure and monitor the port status on this page.
Port Settings
Port
This field displays the interface number.
Link Status
This field displays the connection of the interface.
 Link Up: There is a network device connecting to the interface.
 Link Down: No network device is connecting to the interface.
Admin Mode
The administrative state of the interface:
 Enable: The interface is switched on and the network device can connect to the
interface.
 Disable: The interface is switched off and the network device can not connect to
the interface.
Alias
Specify an alias for the port to help administrators differentiate between different ports.
For example: Head port.
Port Type
This field displays whether the interface is a member of a port channel:
 Trunk Member: The interface is a member of a link aggregation group.
 Normal: The interface is not a member of a link aggregation group (port channel).
Note:
If you add ports in the lag, the port type will show "Trunk Member". The
LAG configuration could be configured in Port Trunk.
Physical Mode
Specify the speed capability of each interface:
 Auto: The duplex mode and the speed of the interface are set by the
auto-negotiation process. The interface can support the maximum capability: Full
duplex and 1 Gbps or 100Mbps.
 10 Mbps Half Duplex: Indicates that the interface works at 10 Mbps in the half
duplex mode.
 10 Mbps Full Duplex: Indicates that the interface works at 10 Mbps in the full
duplex mode.
 100 Mbps Half Duplex: Indicates that the interface works at 100 Mbps in the half
duplex mode.
 100 Mbps Full Duplex: Indicates that the interface works at 100 Mbps in the full
duplex mode.
Physical Status
This field displays the actual port speed and the duplex mode.
Flow Control Mode
Description
C h a p t e r 3 F e a t u r e d F u n c t i o n s
Factory default
interface number
Link down
Enable
None
Normal
Auto
None
3 - 9