Time; Sntp Scalars Configuration - Delta DVS-328 series User Manual

3.1.4 Time

The Delta managed switch supports SNTP (Simple Network Time Protocol). It can work as an SNTP client to
get time from an SNTP or NTP server, and it also can work as an SNTP server to provide time service and send
a time reply to a client.

3.1.4.1 SNTP Scalars Configuration

SNTP Scalars Configuration lets a user configure the time of the switch which can be gotten from the SNTP
server. And it also can be configured manually.

SNTP Scalars Configuration

SNTP Client Status
Specify whether the switch works as an SNTP client, and the switch will send an NTP
request to the server which the user specify on the SNTP Unicast Server Configuration
page.
 Enable: The switch works as an SNTP client.
 Disable: The switch does not work as an SNTP client.
SNTP Server Status
Specify whether the switch works as an SNTP server.
 Enable: The switch works as an SNTP server.
 Disable: The switch does not work as an SNTP server.
Date
The date parameter format is DD/MM/YYYY.
When an SNTP client is disabled, you can manually set the date. When an SNTP client
is enabled, the field is grayed out.

Time

The time parameter format is HH:MM:SS.
When an SNTP client is disabled, you can mpinganually set the time. When an SNTP
client is enabled, the field is grayed out.
Time Zone
The time zone setting format HH:MM is preceded by a plus (+) or minus (-). For
example, for Taipei, enter +08:00. And it allows the conversion from GMT (Greenwich
Mean Time) to the local time.
DST StarTime
Enter the daylight saving time (DST) start time. Specify the date and time in the following
format:
Week of the month-day of the week-month-HH:MM.
For example, if DST starts on the first Saturday in May at 03:00 AM, enter the following
Description
C h a p t e r 3 F e a t u r e d F u n c t i o n s
Factory default
Disable
Disable
DD/MM/YYYY
HH:MM:SS
+00:00
None
3 - 11