Dhcp/Bootp Settings; Dhcp Server - Delta DVS-328 series User Manual

3.1.5 DHCP/BOOTP Settings

The Delta switch can function as a DHCP server, DHCP relay and DHCP L2 relay. If there is no DHCP server in
your network, then you can enable a DHCP server function on the Delta switch. If there is a DHCP server in
your network, then you can configure the Delta switch as a DHCP relay. If there is already a DHCP server and a
DHCP relay in your network, or there are L2 devices between DHCP clients and relay agents, then you can
configure the Delta switch as a DHCP L2 relay in this network.

3.1.5.1 DHCP Server

If the DHCP server is enabled on the switch, it can assign an IP address which is in the same network as the
switch to the client.The Delta switch also supports the MAC Based DHCP Configuration and the Port Based
DHCP Configuration.

DHCP Server Configuration
You can enable or disable the DHCP server function and configure the DHCP configuration on this page.
DHCP Server Configuration
Admin Mode
Specify the status of the DHCP server on the switch:
 Disable: The DHCP server is disabled. When you want to enable the DHCP
relay function, please select this setting.
 Enable: The DHCP server is enabled.
Next Server
Specify the boot server host name.
Boot File
Specify the boot file name.
Network
Enter the network for the DHCP pool.
Subnet Mask
Enter the IP subnet mask for the DHCP pool.
Description
C h a p t e r 3 F e a t u r e d F u n c t i o n s
Factory default
Disable
0.0.0.0
None
None
None
3 - 1 3