Interface Statistics; Arp Configure; Basic - Delta DVS-328 series User Manual

3.12.4 Interface Statistics

You can monitor the statistics of each interface of the Delta switch on this page. The data will be refreshed
every second.
Note:
Make sure that the port you want to monitor is connected to another device.

3.12.5 ARP Configure

ARP protocol is a process to mapping a MAC address to an IP address, and there are two types of ARP
entries-static and dynamic. It will store these mapping entries to a database which called ARP cache. The Delta
managed switches provide dynamic and manual ARP configuration

Basic

3.12.5.1
The ARP table includes dynamic ARP entries and static ARP entries.
ARP Table
Item
IP Address
Port
MAC Address
The VLAN ID that is associated with the MAC address
This field displays the interface which was learned or added manually. It also
means the interface through which the MAC address can be reached.
The status of this entry:
 Invalid: The MAC address is invalid. Normally, invalid MAC addresses are
deleted, so this is an error condition.
 Self: The MAC address is the address of a physical interface of the switch.
 Learned: The MAC address was learned through incoming traffic and is
being used.
 Static: The MAC address was manually added and can not be relearned.
 Other: The MAC address does not fall into one of the other categories.
C h a p t e r 3 F e a t u r e d F u n c t i o n s
Description
3 - 1 0 5