Port Configuration - Delta DVS-328 series User Manual

D V S M a n a g e d I n d u s t r i a l R a c k Mo u n t E t h e r n e t S wi t c h U s e r Ma n u a l
Loopback-Detection Global Configuration
Module Status
Specify whether the status in global configuration is activated or not.

3.1.9.2 Port Configuration

The parameters of Loopback-Detection should be set for each port.
Notice:
If you need to configure Loopback-Detection Port Configuration, you must enable the
Loopback-Detection Global mode.
Loopback-Detection Port Configuration
Interface
The interface number.
Port Control
Enable/Disable the Loopback-Detection feature on the port.
Recovery Mode
There are two recovery modes for recovering the blocking port. Loops occur as the
reason for blocking the port.
 Auto Mode: After the port is blocked, the port will be automatically linked up after a
recovery interval.
 Manual Mode: After the port is blocked, we have to manually enable the port.
Follow Basic Setting > Port Setting > Port Settings (Admin Mode) to enable the
blocking port.
Recovery Interval
In Auto Mode, the blocking port will be linked up after a recovery interval. The unit is a
second and the range is between 30 and 38400.
3 - 3 4
Description
Description
Factory default
Enable
Factory default
interface number
Disable
Manual
300