Lag Settings - Delta DVS-328 series User Manual

D V S M a n a g e d I n d u s t r i a l R a c k Mo u n t E t h e r n e t S wi t c h U s e r Ma n u a l
This field displays whether the flow control is enabled for the port:
 Enable: The flow control is enabled. If the port buffers become full, the switch
sends pause packets.
 Disable: The flow control is disabled. If the port buffers become full, the switch does
not send pause packets.
Jumbo Frame
The field displays whether the jumbo frame is enabled for the port.
 Enable: The jumbo frame is enabled. The switch supports a fixed jumbo frame size
- 9000 bytes payload (9218 bytes frame) size.
 Disable: The jumbo frame is disabled.
Link Trap
Specify whether to send a trap when the interface link status changes:
 Enable: When the link status changes, the switch sends a trap. This is the default
setting.
 Disable: When the link status changes, the switch does not send a trap.

3.1.3.2 LAG Settings

You can configure the LAG settings and monitor the LAG status on this page.

LAG Settings

Port
This field shows the interface number.
Link Status
This filed shows the connection of the interface.
 Link Up: The interface is connected to another device.
 Link Down: The interface is not connected to another device.
Admin Mode
Specify the administrative state of the interface:
 Enable: The interface is switched on and can be connected to another device.
 Disable: The interface is switched off and can not be connected to another
device.
Jumbo Frame
The filed displays whether the jumbo frame is enabled for the port.
 Enable: The jumbo frame is enabled. The switch supports a fixed jumbo
frame size - 9000 byte payload (9018 byte frame) size.
 Disable: The jumbo frame is disabled.
Link Trap
Specify whether the switch sends a trap when the interface link status changes:
 Enable: When the link status changes, the switch sends a trap. This is the
default setting.
 Disable: When the link status changes, the switch does not send a trap.
3 - 1 0
Description
Description
Factory default
Disable
Disable
Enable
Factory default
interface number
Link Down
Enable
Disable
Enable