Multicast Forwarding Table; Traffic Prioritization - Delta DVS-328 series User Manual

D V S M a n a g e d I n d u s t r i a l R a c k Mo u n t E t h e r n e t S wi t c h U s e r Ma n u a l
GMRP Configuration
Specify whether the GMRP mode is enabled.
 Disable: The GMRP mode is disabled.
 Enable: The GMRP mode is enabled.
GMRP Port Configuration
Interface
This field displays the interface number.
Port GMRP Mode
Specify whether the GMRP mode is enabled on the interface.
 Disable: The GMRP mode on the interface is disabled.
 Enable: The GMRP mode on the interface is enabled.

3.5.6 Multicast Forwarding Table

The multicast MAC address can be added manually, and it also can be added by the GMRP function. This
multicast forwarding table can display the type of the MAC address.

Multicast Forwarding Table

Item
Auto-refresh
VLAN ID
MAC Address
Type
Forwarding Interfaces

3.6 Traffic Prioritization

The traffic prioritization allows you to make sure that the time-sensitive and system-critical data can be
transferred with the minimal delay. It uses four queues that are present in UI from the high priority to the low
priority.
The Delta switch supports the DSCP trust mode, the 802.1p trust mode, the queue scheduling (Support
Weighted Round Robin and Strict-Priority) and 4 level priority queues. The traffic prioritization depends on 2
methods:

IEEE 802.1P: a layer 2 marking scheme.

Differentiated Services (DiffServ): a layer 3 marking scheme.
IMPORTANT:
Make sure that you save the configuration in the Save Configuration
page after you have applied the configuration changes. (Save
ConfigSave Configuration) If you do not save the configuration,
then the configuration will be cleared after the switch is rebooted.
3 - 7 4
Description
Description
Checkmark this box, it will refresh the multicast forwarding table automatically.
The field displays the identifier of VLAN.
The field displays the multicast MAC address.
The field displays that the learning type is static or dynamic.
The field displays the forwarding interface number.
Description
Factory default
Enable
Factory default
interface number
Enable