Table of Contents
Advertisement
1.2. GNM 6080 control module
The GNM 6080 control module should not be installed in an ATEX zone (potentially explosive
atmosphere). It is defined as "associated material" for the purposes of the ATEX directive.
Markings
CE Marking
CSA
Marking
Example: * 2014: Year of manufacturing
26: Week number
123: Nth control module made in the week 26.
WARNING : Equipment Nanogun is in accordance with the functional safety standard (Standard
EN13849, level SIL 1), the preservation of this level of safety imposes a periodic control of the
equipment, in minima every 5 years or 15000 hours of functioning (to the first one 2 reached).
This control concerns each of the electric and electronic components as well as on it or the very
specific programs, you have to get in contact with your subsidiary, distributor or usual repre-
sentative of Sames
Technologies who will indicate you the steps to be carry out.
Index revision : C - March 2016
2014 26123 *
Version Software:
S/ N :
2014 26123 *
Version Software:
S/ N :
7
7105
Advertisement
Table of Contents
