Trigger; Air Valve - Sames NANOGUN-MV LR User Manual

10.8. Trigger

• Step 1: Using a screwdriver, unscrew both
shouldered screws and release both sides of the
trigger.
Reassembling the trigger:
• Put in place one on the sides of the trigger on its
shoulder then slide the other side into its housing.

10.9. Air valve

• Step 1: Remove the paint needle
page 35).
• Step 2: Unscrew the air valve stop nut using a 18
mm open-ended spanner.
Position the gun barrel to the top and recover the
spring and the air valve. If the parts do not fall, tap
in the palm of the hand.
or use the paint needle to extract the air valve.
Index revision : C - March 2016
Step 1
(see § 10.6
36
Step 2
7105