Description Of Spray Gun And Gnm 6080 Control Module; Functions Available On Spray Gun - Sames NANOGUN-MV LR User Manual

3. Description of spray gun and GNM 6080 control module

NANOGUN-MV spray guns are designed to spray paint or clear coat whose resistivity is greater than
0.5 MΩ.cm only.
The configurations LR can moreover spray hydrodiluable paints or clear coats when they are equipped
with the suitable produced means of supply. The use of any other type of paint is excluded.
NANOGUN-MV spray guns are to be connected to the GNM 6080 control module.
The models in the NANOGUN-MV range can be differentiated by their air cap, air cap ring, the base
support and the paint hose.
NANOGUN-MV JR06
NANOGUN-MV JR08
NANOGUN-MV JR12
NANOGUN-MV JP

3.1. Functions available on spray gun

• The switch (Item1) allows to start or to cut the high voltage.
When this switch is on the position " I ", an action on the trigger starts up the high voltage.
When this switch is on the position " 0 ", an action on the trigger does not start the high voltage.
• The notched button on the back of the gun (Item 2) allows to regulate the product flow.
• The side notched button (Item 3) allows to regulate the dimension of the spray.
Index revision : C - March 2016
Super Vortex Round Spray - Low Pressure - Dia: 6
mm
Super Vortex Round Spray - Low Pressure - Dia: 8
mm
Super Vortex Round Spray - Low Pressure - Dia: 12
mm
Flat Spray - Low Pressure - Dia: 12 mm
3
Characteristics
1
2
12 7105