Paint Needle; Switch - Sames NANOGUN-MV LR User Manual

10.6. Paint needle

• Step 1: Unscrew the notched button at the rear of
the spray gun, retrieve the spring.
• Step 2: Press the trigger and pull manually the
paint needle towards the back.
WARNING : Every 4 or 5 reassemblies, add some
red dielectric grease (Ref.: H1GSYN037) in the passage channel in the barrel.

10.7. Switch

• Step 1: With a 5,5 mm screwdriver, unscrew the
shouldered screw. Pull upwards the lever of the
switch.
• Step 2: Replace the o-ring
Insert the new switch into its housing. Coat with
low threadlocker the fastening screw and tighten
the screw so that the switch is slightly resistant.
Index revision : C - March 2016
(see § 13.3 page 52).
35
Step 1
Step 1
Step 2
Step 2
7105