6.1. Using the multipurpose spanner
5
4
1
2
3
6
1 : Tighten the air cap ring.
2 : Tighten the ring of the nozzle support.
3 : Tighten the fitted low pressure nozzle assembly (round spray).
4 : Tighten the injector (Dia.: 6 and 8 mm) onto the air cap (round spray).
5 : Tighten the injector (Dia 12 mm) onto the air cap (round spray).
6 : Remove the seal cartridge from the barrel.
Index revision : C - March 2016
20
7105