Operation - Sames NANOGUN-MV LR User Manual

5. Operation

Pressing the trigger controls non-simultaneous opening of the air valve then engaging of high voltage
and then the paint needle. The high voltage pilot can be disabled by using the switch on the gun.
NANOGUN-MV spray guns are fitted with a magnetic sensor which detects the position of the
trigger.This sensor allows to supply the high-voltage as soon as the air valve of air moves back of a value
between 1 and 1,8 mm:
• The button at the rear of the spray gun allows to adjust the paint flow.
• Selector fully turned to the left: max. spray flow.
• Selector fully turned to the right: reduced paint flow.
• The side button allows to adjust the spray.
• Tighten screw: reduced impact.
• Loosen screw: wide impact.
Index revision : C - March 2016 17 7105