Procedure D3: Replacement Of Control Box - Sames Inocoat Inogun M Instruction Manual

6.4.8. Procedure D3: Replacement of control box

By having previously followed steps 1 to 4 of procedure D2
• Step 1: Unscrew the 5 screws, take the housing out of
its housing.
• Step 2: Using the tool (P/N: 240000301) push the
reed light outwards.
• Step 3: Pull the control box out of the handle.
(see § 6.4.7 page 34),
4
1
3
36
DRT7132
D - 2022 /09
2
5
Member of Exel group