With Diaphragm Pump For All Versions - Sames NANOGUN-MV LR User Manual

7.2. With diaphragm pump for all versions

1 Part to be painted
2 NANOGUN-MV Spray Gun
Single-phase mains, 220 V, 50 Hz +
3
ground or 115 V+ ground
Air pressure regulator 0-6 bar - 50 m
4
(for adjusting the spraying air)
5 Compressed air network
6 Stop cocks
7 Oil-removing filter
Air pressure regulator 0-6 bar - 5 m
9
For adjusting the regulator control
pressure (paint flow rate setting)
Air pressure regulator 0-6 bar - 20 m
10
(for adjusting the pump air supply)
12 Potentially explosive atmosphere
13 Area with no risk of explosion
14 Paint flow rate regulator
15 Diaphragm pump (complies with ATEX
Directive)
16 Strainer
17 Paint container
3
Note: m /h volume at 1013 mbar atmospheric pressure and a temperature of 20°C (68°F) .
0
It is recommended to fit the diaphragm pump with a valve on the return line to the paint container
to prime the pump and stir the paint.
WARNING : For the safety of the painter, the paint container, the diaphragm pump, and the paint
filter, if it is metal, must be electrically grounded.
Index revision : C - March 2016
3
/h
0
3
/h
0
3
/h
0
22 7105