Paint Hose Lr - Sames NANOGUN-MV LR User Manual

10.3.2. Paint hose LR

• Step 1: Unscrew the stuffing box locknut using a
27mm open-ended spanner, release the stuffing
box from the bracket.
• Step 2: Using a 21mm open-ended spanner,
loosen the upper paint hose nut. Unscrew the
nut, whilst rotating the hose
To reassemble, tighten the lower paint hose nut until it stops. Position the stuffing box locknut above
the bracket and the stuffing box below in the hexagonal socket. Tighten the stuffing box locknut onto the
bracket.
Index revision : C - March 2016
Step 1
Step 2
32 7105