With A Pressure Tank For All Versions - Sames NANOGUN-MV LR User Manual

7.3. With a pressure tank for all versions

1 Part to be painted
2 NANOGUN-MV Spray Gun
Single-phase mains, 220 V, 50 Hz +
3
ground or 115 V + ground
Air pressure regulator 0-6 bar - 50 m
4
(for adjusting the spraying air)
5 Compressed air network
6 Stop cocks
7 Oil-removing filter
Air pressure regulator 0-6 bar - 5 m
9
For adjusting the regulator control
pressure (paint flow rate setting)
10 Filter
11 Pressure tank (complies with ATEX
Directive)
12 Potentially explosive atmosphere
13 Area with no risk of explosion
3
Note: m /h volume at 1013 mbar atmospheric pressure and a temperature of 20°C (68°F).
0
You are advised to fit a pneumatic stirrer on the pressure tank to stir the paint.
A filter with a screen should be fitted at the spray gun paint hose inlet.
WARNING : For the safety of the painter, the pressure tank and the paint filter, if it is metal, must
always be electrically grounded.
Index revision : C - March 2016
3
/h
0
3
/h
0
23
GNM 6080
9
7105