Dual Control Units - M/A-Com M7100IP Series Installation Manual

DUAL CONTROL UNITS

The Dual Control feature can be configured for either front mount or for
remote mount radio units. Each configuration provides for a Main Control
Unit and an Auxiliary Control Unit. In the front mount configuration, the
Main Control Unit is on the Radio Unit itself, with the Auxiliary Control Unit
located in a convenient location (see Figure 21A). In the remote mount
configuration, the Main Control Unit is typically located in the vehicle cab,
with the Auxiliary Control Unit located in a convenient location (see Figure
21B).
All radio units and control units in the Dual Control configuration MUST BE
PROGRAMMED prior to final installation. It is recommended that the units
be first programmed at an Authorized Service Center, and then transferred to
the user's installation.
Figure 21 – Dual Control Unit – Basic Configurations for Front Mount
and Remote Mount Installations
37