Operations For Protocol Setting Data - Mitsubishi Electric FX5 User Manual

Operations for protocol setting data

The protocol setting data can be written to the CPU built-in memory or an SD memory card. The written protocol data in the
memory can be read and verified. The following describes the operations for the protocol setting data.
Writing protocol setting data
Write the protocol setting data on the screen displayed by the following operation.
Online  Module Write
Window
Precautions
The written protocol setting data is reflected when the power is turned on or the CPU module is reset.
• The protocol setting data is written to module extended parameter (UEX3FF01.PPR).
• When using protocol setting data written to SD memory card, set the protocol setting data transferred to the
CPU built-in memory by boot operation. For details, refer to User's manual (Application).
Reading protocol setting data
Read the protocol setting data on the screen displayed by the following operation.
Online  Module Read
Window
6 PREDEFINED PROTOCOL SUPPORT FUNCTION
174
6.6 Protocol Setting
The procedure to write the data is as follows.
1.
Select a CPU module to which the protocol setting data
is written from Module Selection. Only the CPU module
specified in specify connection destination connection of
GX Works3 can be specified.
2.
Select the memory to which the protocol setting data is
to be written from Target Memory.
3.
Click [Execute] to execute writing.
The procedure to read the data is as follows.
1.
Select a CPU module from which the protocol setting
data is read from Module Selection. Only the CPU
module specified in specify connection destination
connection of GX Works3 can be specified.
2.
Select the memory to which the protocol setting data is
to be read from Target Memory.
3.
Click [Execute] to execute reading.