Mitsubishi Electric FX5 User Manual page 175

Item Description
Number of Send Set the number of times the CPU module retries to send
Retries when the sending from the CPU module has not been
completed within the set time of monitoring time. Error
occurs if sending has not been completed despite the
specified number of times of sending retries.
Send Retry Interval Set the interval between the failure of sending from the
CPU module and the retry when the sending from the
CPU module has not been completed within the set time
of monitoring time.
Standby Time Set standby time between when a protocol set to the
CPU module turns to the execution status and when it
actually sends the data.
Monitoring Time Set the waiting time between the send start and
completion. An error occurs when the send is not
completed within the specified time. However, if the
send is retried, the data is resent for the number of send
retries.
: Necessity, : Not necessity
*1 These items can be set when the project is changed to an editable project on the protocol setting screen.
*2 When 0 is set, infinite wait is set.
The communication parameters can be set for multiple protocols by clicking the [Communication Parameter
Batch Setting] button and setting protocol No. range, receive setting, and send setting.
Setting requirement
Predefined User Add New
Protocol Protocol
Library Library
  
  
  
  
6 PREDEFINED PROTOCOL SUPPORT FUNCTION
Setting range
0 to 10
0 to 30000 (unit: 10ms)
0 to 30000 (unit: 10ms)
*2
0 to 30000 (unit: 100ms)
6
173
6.6 Protocol Setting