Specifications - Mitsubishi Electric FX5 User Manual

Communication device
Built-in RS-485 port
Communication FX5-485-BD
board
FX5-232-BD
Communication FX5-485ADP
adapter
FX5-232ADP
*1 Assigned to CH3 or CH4 in order of proximity to CPU module.
5.4

Specifications

This section describes the communication specifications and performance of non-protocol communication.
Items
Transmission standard
Maximum overall distance
Number of Transfer Data
Protocol type
Control procedure
Communication method
Baud rate
Character format Start bit
Data length
Parity bit
Stop bit
Header
Terminator
Control line
Sum check
5 NON-PROTOCOL COMMUNICATION
130
5.4 Specifications
Serial port Important points for selection
CH1 Since it is built-into the CPU module, there is no need to add
equipment.
CH2 Mounted on top of the CPU module, there is no change in the
installation space requirements.
*1
CH3, CH4 Mount the communication adapter to the left of the CPU
module.
Specifications
RS-485 and RS-422 standard
When FX5-485ADP is used: 1200 m or less
When using built-in RS-485 port or FX5-485-BD: 50 m
or less
0 to 4096

Non-protocol communication
Half-duplex, bi-directional communication/full-duplex, bi-directional communication
300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps

7 bits/8 bits
None, odd or even
1 bit/2 bits
Provided or not provided
Provided or not provided

Provided or not provided
Overall distance
50 m or less
50 m or less
15 m or less
1200 m or less
15 m or less
RS-232C standard
15 m or less
Provided or not provided