Adding Protocols - Mitsubishi Electric FX5 User Manual

Melsec iq-f series
Hide thumbs Also See for FX5:
Table of Contents

Advertisement

The procedure to set a protocol on the protocol setting screen is as follows.
1.

Adding protocols

Select or create a protocol from libraries.
Page 171 Adding protocols
2.
Configuring detailed setting of protocols
Set the information and operation of protocols.
Page 172 Configuring detailed setting of protocols
3.
Setting packets
Set the packets of protocols.
Page 176 Packet Setting
Adding protocols
Add or create a protocol from the predefined protocol library or user protocol library. Add a protocol on the screen displayed
by the following operation.
Protocol setting screen  Edit  Add Protocol
Window
The setting item of above screen is follows.
Item
Description
*1
Type
Select a protocol type.
Protocol No.
Set the number of the protocol to be added.
Manufacturer
Set the manufacturer's name of the counterpart device
registered in the library.
Model
Set the model of the counterpart device registered in the
library of the selected manufacturer.
Protocol Name
Set the protocol name of the counterpart device
registered in the library of the selected model.
: Required, : Not required
*1 Predefined Protocol Library: The predefined protocol library offered by GX Works3
User Protocol Library
: The protocol library which a user registered
Setting requirement
Predefined
User
Add New
Protocol
Protocol
Library
Library
6 PREDEFINED PROTOCOL SUPPORT FUNCTION
6
Setting range
• Predefined Protocol
Library
• User Protocol Library
• Add New
1 to 64
Manufacturer's name
registered in the library.
Model registered in the
library of the selected
manufacturer.
Protocol name registered
with the library of the
selected model.
171
6.6 Protocol Setting

Advertisement

Table of Contents
loading

Table of Contents