Mitsubishi Electric FX5 User Manual page 139

■SM/SD Setting
Communication board (CH2)
Navigation Window  Parameter  FX5UCPU  Module Parameter  Extended Board
Window
The following screen will be displayed if [FX5-232-BD] or [FX5-485-BD] is set for the extended board and [Non-protocol
Communication] is set for the communication protocol type. Fixed setting and SM/SD setting are the same as in the case of
built-in RS-485 port (CH1).
■Basic Settings
Communication adapter (CH3/CH4)
When an expansion adapter is used, add expansion adapter to Module Information.
Navigation window  Parameter  Module Information  Right-click  Add New Module
After adding the expansion adapter, make settings on the screen displayed from the following operation.
Navigation window  Parameter  Module Information  ADP1 to ADP6 (Communication adapter)  Module
Parameter
Window
Each setting screen is the same as in the case of built-in RS-485 port (CH1).
5 NON-PROTOCOL COMMUNICATION
5.6 Communication Settings
5
137