Connecting the Accessories
Connecting the BNC Adaptor (Option 1E5)
Connecting Mouse and Keyboard
Network Analyzer
You need to connect some accessories before use.
When the E5061B is equipped with Option 1E5
(high-stability frequency standard), connect the BNC adaptor
from the Ref Oven terminal to the Ref In terminal on the
rear panel as shown in
Option 1E5. When Option 1E5 is installed, the frequency
accuracy and stability of the E5061B improves further.
GPIB
e5061b059
Figure 4
Connecting the BNC adaptor
The E5061B allows you to connect Mouse and/or keyboard
through USB. USB mouse and keyboard can be connected
with the USB ports on the front or rear panels.
Initial registration of the E5061B requires the mouse and
keyboard before turning on the power.
Figure
4. The BNC adaptor is included in
TEST SET I/F
VIDEO
WARNING:
Serial Labe l
No operator serviceable parts inside.
Refer servicing to qualified personnel.
E5061B
Windows Label
10 MHz
BNC adaptor
1
Installation
115 V
50/60 Hz 300 VA Max
LINE
ICES/NMB-001
27