Power Supply; Verification Of The Power Supply; Verification And Connection Of Power Cable - Keysight E5061B Installation Manual

1
Installation

Power Supply

Verification of the Power Supply

Verification and Connection of Power Cable

WA R N I N G
WA R N I N G
28
Before turning on the E5061B power, check the following.
Confirm that the power supplied to the E5061B meets the
following requirements:
Voltage
Frequency
Maximum power
consumption
* 1. Switched automatically by the E5061B in conformity to the voltage used.
The three-wire power cable attached to the E5061B has one
wire serving as a ground. Using this power cable allows the
E5061B to be grounded, thereby protecting you against
electrical shock from the power outlet.
Step 1.
Confirm that the power cable is not damaged.
NEVER use a power cable showing any sign of damage. Faulty
cables can cause electrical shock.
Step 2.
Use the supplied cable to connect between the
power cable receptacle
of the E5061B and a three-wire power outlet with the grounding
prong firmly connected in the ground slot.
Use the supplied power cable with grounding wire to securely
ground the E5061B.
Power cord list, 16000-99101 shows the power cable options.
Requirements
90 to 132 VAC or 198 to 264 VAC
47 to 63 Hz
300 VA
(Figure 5 on page 31) on the rear panel
*1
Network Analyzer