Table of Contents
Advertisement
Installation
Connecting the Accessories
Connecting the Accessories
You need to connect some accessories before use.
Connecting the BNC Adaptor (Option 1E5)
When the E5071C is equipped with Option 1E5 (high-stability frequency
standard), connect the BNC adaptor from the Ref Oven terminal to the Ref In
terminal on the rear panel. The BNC adaptor is included in Option 1E5. When
Option 1E5 is installed, the frequency accuracy and stability of the E5071C will
further improve.
Figure 2-4
Connecting the BNC adaptor
BNC adaptor
e5071cqe1002
Connecting Mouse and Keyboard
The E5071C allows you to connect Mouse and/or keyboard through USB. USB
mouse and keyboard can be connected with the USB ports on the front or rear
panels.
System Recovery of the E5071C requires the mouse and keyboard before
turning on the power.
Keysight E5071C ENA Series RF Network Analyzers
ccr.keysight@keysight.com
ICES/NMB-001
ISM GRP 1-A
C
US
NOTE
Switch must remain
ON while operating.
-
115 V
230 V
50/60 Hz
350 VA Max
LINE
REF IN
REF OUT
AUX IN 2
AUX IN 1
±1 V, ±10 V
10 MHz
REF OVEN
(10 MHz)
KCC-REM-ATi-
WNANALYZERF36
24 BIT I/O
EXT TRIG
EXT TRIG
OUT
IN
GPIB
Serial Label
W in d ows
La b el
19
Advertisement
Table of Contents
