Log - DCP -WR300N User Manual

The following table describes the parameters of this page.
Field
System Time
NTP Configuration
State
Server
Server2
Time Zone

3.8.5 Log

Choose Maintenance > Log, the page shown in the following figure appears. In
this page, you can enable or disable system log function and view the system log.
Configuration
Description
Set the system time manually.
Select enable or disable NTP function. You need
to enable NTP if you want to configure the
parameters of NTP.
Set the primary NTP server manually.
Set the secondary NTP server manually.
Choose the time zone in which area you are from
the drop down list.
80 DCP-WR300N