Ftp Alg Port - DCP -WR300N User Manual

Click the Usual Application Name drop-down menu to choose the application you
want to setup for port triggering. When you have chosen an application the default
Trigger settings will populate the table below.
If the application you want to setup isn't listed, click the User-defined Application
Name radio button and type in a name for the trigger in the Custom application field.
Configure the Start Match Port, End Match Port, Trigger Protocol, Start Relate
Port, End Relate Port, Open Protocol and Nat type settings for the port trigger
you want to configure.
When you have finished click the Apply changes button.

3.5.2.6 FTP ALG PORT

Click FTP ALG PORT in the left pane, the page shown in the following figure
appears.
Configuration
50 DCP-WR300N