DCP -WR300N User Manual page 75

Field
LAN ACL Switch
IP Address
Services Allowed
Add
Reset
Set direction of the data packets to WAN, the page shown in the following figure
appears.
Configuration
Description
WAN. In this example, LAN is selected.
Select it to enable or disable ACL function.
Enter the IP address of the specified interface. Only
the IP address that is in the same network segment
with the IP address of the specified interface can
access the router.
You can choose the following services from LAN:
Web, Telnet, FTP, TFTP, SNMP or PING. You can
also choose all the services.
After setting the parameters, click it to add an entry
to the Current ACL Table.
Click it to refresh this page.
72
DCP-WR300N