Dhcp Static - DCP -WR300N User Manual

3.4.2.3 DHCP Static

Click DHCP Static in the left pane, the page shown in the following figure
appears. You can assign the IP addresses on the LAN to the specific individual
PCs based on their MAC address.
The following table describes the parameters and buttons of this page.
Field
IP Address
MAC Address
Add
Delete Selected
Undo
DHCP Static IP Table
3.4.2.4 IPv6
Click IPv6 menu in the left pane, the following page will appear. It allows you to
configure IPv6 LAN settings. You can set LAN RA server work mode and LAN
DHCPv6 server word mode.
Configuration
Description
Enter the specified IP address in the IP pool
range, which is assigned to the host.
Enter the MAC address of a host on the LAN.
After entering the IP address and MAC address,
click it. A row will be added in the DHCP Static IP
Table.
Select a row in the DHCP Static IP Table, then
click it, this row is deleted.
Click it to refresh this page.
It shows the assigned IP address based on the
MAC address.
29 DCP-WR300N