Field
Interface
Add Route
Update
Delete
Selected
Show
Routes
Static Route
Table
Click Show Routes, a table showing a list of destination routes commonly
accessed by your network appears..
3.5.1.2 IPv6 Static Route
Click IPv6 Static Route in the left pane, the page shown in the following figure
appears. This page is used to configure the IPv6 routing information. You can
add or delete IP routes.
Configuration
Description
The interface for the specified route.
Click it to add the new static route to the Static Route
Table.
Select a row in the Static Route Table and modify the
parameters. Then click it to save the settings temporarily.
Select a row in the Static Route Table and click it to
delete the row.
Click it, the IP Route Table appears. You can view a list
of destination routes commonly accessed by your
network.
A list of the previously configured static IP routes.
43
DCP-WR300N
Need help?
Do you have a question about the DCP-WR300N and is the answer not in the manual?