Others - DCP -WR300N User Manual

3.5.6 Others

Choose Advanced > Others. The page that is displayed contains Bridge
Setting, Client Limit, Tunnel and Others.
3.5.6.1 Bridge Setting
Choose Bridge Setting in the left pane, the page shown in the following figure
appears. This page is used to configure the bridge parameters. You can change
the settings or view some information on the bridge and its attached ports.
The following table describes the parameters and button of this page:
Field
Ageing Time
Show MACs
Click Show MACs, the page shown in the following figure appears. This table
shows a list of learned MAC addresses for this bridge.
Configuration
Description
If the host is idle for 300 seconds (default value), its
entry is deleted from the bridge table.
Click it to show a list of the learned MAC addresses
for the bridge.
60 DCP-WR300N