DCP -WR300N User Manual page 50

The following table describes the parameters of this page.
Field
Service Type
Protocol
WAN Setting
WAN Interface
WAN Port
LAN Open Port
LAN IP Address
Configuration
Description
You can select the common service type, for
example, AUTH, DNS,FTP or POP3. You can also
define a service name.
 If you select Usual Service Name, the
corresponding parameter has the default
settings.
 If you select User-defined Service Name, you
need to enter the corresponding parameters.
Choose the transport layer protocol that the service
type uses. You can choose TCP or UDP.
You can choose Interface or IP Address.
Choose the WAN interface that will apply virtual
server.
Choose the access port on the WAN.
Enter the port number of the specified service type.
Enter the IP address of the virtual server. It is in the
47 DCP-WR300N