Password - DCP -WR300N User Manual

Upload
Reset
3.8.1.2 Backup/Restore
Click Backup/Restore in the left pane, the page shown in the following figure
appears. You can backup the current settings to a file and restore the settings
from the file that was saved previously.

3.8.2 Password

Choose Maintenance > Password, the page shown in the following figure
appears. By default, the user name and password are admin and admin
respectively. The common user name and password are user and user
respectively.
Configuration
After selecting the firmware file, click Upload to
starting upgrading the firmware file.
Click it to starting selecting the firmware file.
77
DCP-WR300N