Field
Default Gateway
Max Lease Time
Domain Name
DNS Servers
Set VendorClass
IP Range
Click Show Client in the DHCP Mode page, the page shown in the following
figure appears. You can view the IP address assigned to each DHCP client.
The following table describes the parameters and buttons in this page.
Field
IP Address
MAC Address
Configuration
Description
shows IP addresses assigned to clients.
Enter the default gateway of the IP address pool.
The lease time determines the period that the host
retains the assigned IP addresses before the IP
addresses change.
Enter the domain name if you know. If you leave this
blank, the domain name obtained by DHCP from the
ISP is used. You must enter host name (system
name) on each individual PC. The domain name can
be assigned from the router through the DHCP
server.
You can configure the DNS server ip addresses for
DNS Relay.
Click it, the Device IP Range Table page appears.
You can configure the IP address range based on the
device type.
Description
It displays the IP address assigned to the DHCP
client from the router.
It displays the MAC address of the DHCP client.
Each Ethernet device has a unique MAC address.
26
DCP-WR300N
Need help?
Do you have a question about the DCP-WR300N and is the answer not in the manual?