About The Web Configuration; Access The Router - DCP -WR300N User Manual

3 About the Web Configuration

This chapter describes how to configure the router by using the Web-based
configuration utility.

3.1 Access the Router

The following is the detailed description of accessing the router for the first time.
Configure the IP address of the PC as 192.168.1.X (2~254), Subnet Mask as 255.
255.255.0.
Open the Internet Explorer (IE) browser and enter http://192.168.1.1.In the
Login page that is displayed, enter the default username and password.They are
both 'admin'.
If you log in as a super user, you will see the Device Info page as shown below
appears. You can check the basic settings of the modem, such as firmware
version, upstream speed, downstream speed, LAN MAC address, LAN IP
address, DHCP server status. You can also view the basic status of WAN and
DNS server.
Configuration
7
DCP-WR300N