DCP -WR300N User Manual page 67

a domain name, DNS translates the name into the corresponding IP address. For
example, the domain name www.example.com might be translated to
198.105.232.4. The DNS has its own network. If one DNS server does not know
how to translate a particular domain name, it asks another one, and so on, until
the correct IP address is returned.
3.6.3.1 DNS
Click DNS in the left pane, the page shown in the following figure appears. You
can configure the DNS parameters. You can set it to obtain DNS automatically or
enter the DNS server manually.
The following table describes the parameters and buttons of this page.
Field
Attain DNS
Automatically
Set DNS
Manually
Apply Changes
Reset Selected
Configuration
Description
Select it, the router accepts the first received DNS
assignment from one of the PPPoA, PPPoE or MER
enabled PVC(s) during the connection establishment.
Select it, enter the IP addresses of the primary and
secondary DNS server.
Click it to save the settings of this page.
Click it to start configuring the parameters in this page.
64 DCP-WR300N