DCP -WR300N User Manual page 35

Field
Broadcast SSID
Channel Width
Control Sideband
Country/Area
Channel Number
Radio Power
Show Active Clients
Apply Changes
3.4.3.2 Security
Choose WLAN > Security, and the following page appears.
Configuration
Description
that is used when the wireless client connecting to
the modem.
Enable or disable this function.
You can choose 20MHZ, 40MHZ or 20/40MHZ.
You can choose Upper or Lower.
Select the country from the drop-down list.
A channel is the radio frequency used by
802.11b/g/n wireless devices. You should use a
different channel from an adjacent AP to reduce
the interference. Interference and degrading
performance occurs when radio signal from
different APs overlap. Choose a channel from the
drop-down list box.
You can choose the transmission power of the
radio signal. The default one is 100%. It is
recommended to choose the default value100%.
Click it to view the information of the wireless
clients that are connected to the modem.
Click it to apply the settings temporarily. If you
want to save the settings of this page
permanently, click Save in the lower left corner.
32
DCP-WR300N