Configuration
3.5.3 QoS
Choose Advanced > QoS, the page shown in the following figure appears.
Entries in the QoS Rule List are used to assign the precedence for each
incoming packet based on physical LAN port, TCP/UDP port number, source IP
address, destination IP address and other information.
Step 1
Enable IP QoS and click Apply to enable IP QoS function.
Step 2
Click add rule to add a new IP QoS rule.
DCP-WR300N
52
Need help?
Do you have a question about the DCP-WR300N and is the answer not in the manual?