Wash Function - ABB AX416 User Manual

...2.3 Operating Page

2.3.6 Wash Function

Note. The Wash function is available only if
Manual
On
-----
Off
Wash Function
-----
Press To Wash
Press To Abort
is set to
A3: Type Wash
Wash Function
Off – Wash function off. Lower display line of Operating Page shows
WASH INHIBITED
On – Wash function controlled automatically. Lower display line of Operating Page
shows WASH IN PROGRESS
Manual – Enables wash function to be initiated manually – see below.
Note. Set to
Wash Function
See Section 3.1.
VIEW SETPOINTS
set to (for
Probe Type pH either
See Section 4.1.
SENSOR CAL.
set to or
Probe Type Redox ORP
– see Section 5.3.
set to
Enable Cals
SENSOR CAL.
Alter Sec. Code
Security Code
Alter Sec. Code
CONFIG. DISPLAY
Wash Function
Press To Wash
Monitoring pH
Wash Function
Redox (ORP)
Operating Page.
Dual Redox
pH/Redox (ORP)
Press to Wash (Manual Wash only)
and
Press to Wash Press
Press the
WASH IN PROGRESS
the Operating Page and the lower display line shows
the wash cycle is completed. The
that was set before
Monitoring pH
Press the
Redox (ORP)
of the Operating Page.
Dual Redox
pH/Redox (ORP)
– see Section 5.5.
.
.
before removing the sensor from the process.
Off
sensor if dual input analyzer) – see Section 5.3.
(for sensors in any combination if dual input analyzer)
both
(Section 5.3) – see Section 4.1.
Yes
not set to zero (Section 5.8) – see Section 5.1.
set to zero (Section 5.8) – see Section 5.2.
set to – see below.
Manual
not set to . The display returns to the top of the
Manual
are shown alternately on the lower display line.
to Abort
key to initiate the wash cycle. The display returns to the top of
Wash Function
was selected.
Manual
key to abort the wash cycle. The display returns to the top
2 OPERATION
until
WASH IN PROGRESS
selection reverts to the one
11