ABB AX416 User Manual page 18

...3 OPERATOR VIEWS
3.5 View Logbook
Note. The View Logbook function is available only if the option board is fitted and analog features enabled (Section 7.3) and
is set to (Section 5.9).
Logbook On
-----
VIEW LOGBOOK
Cals
Power
Errors
-----
Alarms
VIEW LOGBOOK
1
A1
-----
On
11:09:02 12:34
Alarms
Cals
Power
-----
Errors
Errors
VIEW LOGBOOK
1
Sen.A
-----
Pt100
11:09:02 12:34
16
The logbook stores data entries for alarm events, sensor errors, power failures and pH
calibration information.
View Logbook
Use the and keys to access the
Note. If no entries are stored in the
Alarms
The logbook contains up to 10 entries (entry 1 is the most recent), each comprising
Alarms
an alarm number, alarm state (On or Off) and the date/time of the occurrence.
VIEW CLOCK Option board fitted and analog features enabled (Section 7.3) – see Section 3.6.
SENSOR CAL.
See Note on Page 13.
Security Code
CONFIG. DISPLAY
2
A1 Advance to entries 2 to 10.
Note. If no more entries are stored, the display shows
View Logbook
Use the and keys to access the
Note. If no entries are stored in the
Errors
The logbook contains up to 5 entries (entry 1 is the most recent), each comprising
Errors
the sensor letter, error number and the date/time of the occurrence.
Option board fitted and analog features enabled (Section 7.3) – see Section 3.6.
VIEW CLOCK
SENSOR CAL.
See Note on Page 13.
Security Code
CONFIG. DISPLAY
2 Advance to entries 2 to 5.
Sen.A
Note. If no more entries are stored, the display shows
logbook.
Alarms
logbook, the display shows
Alarms
logbook.
Errors
logbook, the display shows
Errors
No More Entries .
No More Entries .
.
No More Entries
.
No More Entries