ABB AX416 User Manual page 59

7.3 Factory Settings
Section 7.3, Page 58
FACTORY SETTINGS
Use the Menu
Key to scroll
through
the Menus
To OPERATING PAGE
Cal. Output 2
O2: Adjust 4mA
O2: Adjust 20mA
Key
Available only if the Option Board is fitted
and Analog features enabled – see page 61
Dual input analyzer only
Use the Sidescroll Key to scroll through the Pages within each Menu
Factory Set Code Cal. Sensor A
A:mV Zero (-1V)
A:mV Span (+1V)
Use the Downscroll
A:T.Zero (100R)
Key to scroll through
A:T.Span (150R)
the Frames
within each Page
A:T.Zero (1K0)
A:T.Span (1K5)
A:T.Zero (2K0)
A:T.Span (5K0)
Cal. Output 3 Cal. Output 4
O3: Adjust 4mA O4: Adjust 4mA
O3: Adjust 20mA O4: Adjust 20mA
Fig. 7.2 Overall Factory Settings Chart
Cal. Sensor B Cal. Output 1
B:mV Zero (-1V) O1: Adjust 4mA
B:mV Span (+1V) O1: Adjust 20mA
B:T.Zero (100R)
B:T.Span (150R)
B:T.Zero (1K0)
B:T.Span (1K5)
B:T.Zero (2K0)
B:T.Span (5K0)
Option Board Alter Fact.Code
Note. The page is
Option Board
displayed only if the Option Board is fitted.
7 CALIBRATION...
57