Configure Sensors - ABB AX416 User Manual

...5.3 Configure Sensors

A: Probe Type
set to
pH
Antim.
-----
Glass
A: Electrode
Manual
-----
Auto
A: Temp. Comp.
Manual
Auto
3K Bal
Pt1000
-----
Pt100
A: Temp. Sensor
25. 0
Deg.C
A: Preset Temp.
pH Electrode Type
Select the type of pH electrode used, Glass or Antimony.
Temperature Compensation
Select to enable the analyzer to compensate automatically for fluctuations in sample
Auto
temperature.
Temperature Sensor (Automatic Temperature Compensation only)
Select the type of temperature sensor used: Pt100, Pt1000 or Balco 3K.
continued on next page.
A: Sample Comp.
Preset Temperature (Manual Temperature Compensation only)
Enter the temperature of the sample within the range –10.0 to 120.0C.
continued on next page.
A: Set Min Slope
5 PROGRAMMING...
31